Home»Computer Fundamentals»Networking Mcqs»Networking Miscellaneous»Which of the following TCP/IP protocol is used for transferring files from one machine to another?
Exercise :: TCP/IP - TCP/IP
View Answer Discuss in Forum Workspace Report
View Answer Discuss in Forum Workspace Report
Page 2
Exercise :: TCP/IP - TCP/IP
View Answer Discuss in Forum Workspace Report
View Answer Discuss in Forum Workspace Report
Page 3
To turn a binary number into decimal, you just have to add the values of each bit that is a 1. The values of 10011101 are 128, 16, 8, 4, and 1. 128 + 16 + 8 + 4 + 1 = 157.
Hexadecimal is a base-16 number system. The values of hexadecimal are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F-16 characters total, from which to create all the numbers you'll ever need. So, if 1001 in binary is 9, then the hexadecimal equivalent is 9. Since we then have 1101, which is 13 in binary, the hexadecimal answer is D and the complete hexadecimal answer is 0x9D.
Also Read Similar Questions Below :
⇒ How many digits of the DNIC (Data Network Identification Code) identify the country?first first twofirst three
first four
⇒ Which of the following statement is correct?Satellite transponders contain a device that echos the radiation without change from one point on earth to anotherSatellite transponders contain a receiver and transmitter designed to relay microwave transmissions from one point on earth to anotherSatellite transponders use lower frequency reception of radiation from earth stations and higher frequency for transmission to earth stations
Satellite transponder contains devices that transform the message sent from one location on earth to a different code for transmission to another location
⇒ In OSI network architecture, the routing is performed bysession layernetwork layertransport layer
data link layer
⇒ Which of the following conditions is used to transmit two packets over a medium at the same time?CollisionContentionSynchronous
Asynchronous
⇒ Eight stations are competing for the use of a shared channel using the 'Adaptive tree Walk Protocol'. If the stations 7 and 8 are suddenly become ready at once, how many bit slots -3 slots5 slots7 slots
9 slots
⇒ On a class B network, how many hosts are available at each site with a subnet mask of 248?204640948190
16382
⇒ Sending a file from your personal computer's primary memory or disk to another computer is calledhang onuploadinglogging on
downloading
⇒ For connecting modem, a computer must be equipped with a port that conforms to the RS-232 standard of the Electronic Industries Association of America. What do the letters 'RS' stand for?Registered sourceRandom sequenceRecognised standard
Recommended standard
⇒ You are working with a class C network. You are required to configure it for five subnets, each of which will support 25 nodes. What subnet should you use?255.255.255.224255.255.255.228255.255.255.232
255.255.255.255
⇒ Token-Ring because it currently can run at both 4Mbps and 16Mbps. This means that it can be used in any topology8 Kbps16 Kbps32 Kbps
64 Kbps
⇒ Which of the following TCP/IP internet protocol a diskless machine uses to obtain its IP address from a server?RIPX.25RDP
RARP
⇒ Which of the following files is used for NetBIOS name resolution?ARPFQDNHOSTS
LMHOSTS
⇒ Which of the following types of channels moves data relatively slowly?wideband channelvoiceband channelbroadband channel
narrowband channel
⇒ Avalanche photodiode receivers can detect hits of transmitted data by receiving100 photons200 photons300 photons
400 photons
⇒ Which of the following performs modulation and demodulation?modemsatellitefiber optic
coaxial cable
⇒ The EIA-232 interface has _____ pins.51525
35
⇒ How many OSI layers are covered in the X.25 standard?135
7
⇒ Microprogramming iscontrol unit programmingprogramming of minicomputersassembly language programming
macro programming of microcomputers
⇒ Because the configuration infor-mation for a DHCP client is received dynamically, you must use which utility to read the current configuration to verify the settings?ARPPINGTRACERT
IPCONFIG
⇒ The process of converting analog signals into digital signals so they can be processed by a receiving computer is referred to as:modulationdemodulationsynchronizing
None of the above
⇒ The area of coverage of a satellite radio beam is known asIdentityFootprintBeam width
Circular polarization
⇒ A modem is connected in between a telephone line and anetworkcomputerserial port
communication adapter
⇒ Which of the following statement is incorrect?The second layer of communication is the data-link layerErrors in the physical layer can be detected by the data link layerThe fourth layer, in reference to the OSI model, is the session layer
The CCITT Recommendation X.25 specifies three layers of communication: physical, link and network
⇒ A proposed network infrastructure of interconnected local, regional, and global networks that would support universal interactive multimedia communications. Select the best fit for answer:Client/Server networksInternetworked enterpriseInformation super highway
Business applications of telecommunications
⇒ The data communication support should include, but is not restricted tofile and database accessfile transfer and transaction processingterminal support, electronic mail and voice grams
All of the above
⇒ The basic Ethernet design does not provideaddressingaccess controlmultiple virtual networks
automatic retransmission of a message
⇒ The core diameter of a single-mode fibers is about10 times the fiber radius7 times the light carried in the fiber3 times the wavelength of the light carried in the fiber
10 times the wavelength of the light carried in the fiber
⇒ What operates in the Data Link and the Network layer?NICBridgeRouter
Brouter
⇒ The communication mode that supports two-way traffic but only one direction at a time issimplexduplexhalf duplex
multiplex
⇒ To connect a computer with a device in the same room, you might be likely to usea coaxial cablea dedicated linea ground station
all of the above
Which of the following `"TCP"/"IP"` protocols is used for transferring files from one machine to another?
Is there an error in this question or solution?
Protocols are
A. Agreements on how communication components and DTE
B. Logical communication channels used for transferri
C. Physical communication channels used for transferr
D. None of the above