October 7, 2020 CCNA 3 v7 ENSA Practice PT Skills Assessment Addressing Table
IntroductionYou are completing the configuration of the XYZ Corp network.
InstructionsPart 1: Configure OSPFStep 1: Activate OSPF.Use process ID 10 for OSPF activation on all routers.
Step 2: Configure router IDs.Configure router IDs on the multiaccess network routers as follows: Step 3: Customize OSPF operation.
Part 2: Configure NATIn this part of the practice skills assessment, you will configure static and dynamic NAT at the network edge. Step 1: Configure static NATConfigure static NAT to translate the address of the Partner Server on LAN-A to the public address of 192.0.2.115. Verify that the translations are occurring. Step 2: Configure dynamic PAT.
Part 3: Configure ACLsConfigure access control lists to meet the following requirements.
Part 4: Manage Network DevicesStep 1: Configure NTPConfigure router RTR-B to use Utility Server as its time source. Step 2: Backup IOS to ServerBackup the IOS image file on router RTR-B to Utility Server. Answers Script:RTR-1 Router / (Router 1)enable configure ter router ospf 10 exit interface g0/0/0 ip ospf 10 area 0 interface s0/1/0 ip ospf 10 area 0 exit router ospf 10 router-id 9.9.9.9 exit int g0/0/0 ip ospf priority 255 exit ip route 0.0.0.0 0.0.0.0 s0/1/1 router ospf 10 default-information originate exit int s0/1/0 ip ospf hello-interval 20 ip ospf dead-interval 80 exit router ospf 10 auto-cost reference-bandwidth 1000 exit router ospf 10 passive-interface s0/1/1 exit ip nat inside source static 192.168.11.100 192.0.2.115 int s0/1/1 ip nat outside int g0/0/0 ip nat inside exit access-list 1 permit 192.168.0.0 0.0.255.255 ip nat pool POOL-1 192.0.2.116 192.0.2.118 netmask 255.255.255.248 ip nat inside source list 1 pool POOL-1 overload int s0/1/0 ip nat inside exit ip access-list standard VTY-BLOCK permit 192.168.0.0 0.0.255.255 deny any exit line vty 0 4 access-class VTY-BLOCK in exit end copy running-config startup-config RTR-2 Router / (Router 2)enable configure terminal router ospf 10 exit interface g0/0/0 ip ospf 10 area 0 interface g0/0/1 ip ospf 10 area 0 exit router ospf 10 router-id 8.8.8.8 exit router ospf 10 auto-cost reference-bandwidth 1000 exit router ospf 10 passive-interface g0/0/0 exit end copy running-config startup-config RTR-3 Router / (Router 3)enable configure terminal router ospf 10 exit interface g0/0/0 ip ospf 10 area 0 interface g0/0/1 ip ospf 10 area 0 exit router ospf 10 router-id 7.7.7.7 exit router ospf 10 auto-cost reference-bandwidth 1000 exit router ospf 10 passive-interface g0/0/0 exit access-list 10 deny 192.168.11.0 0.0.0.255 access-list 10 permit any int g0/0/1 ip access-group 10 in exit end copy running-config startup-config RTR-A Router 4enable configure terminal router ospf 10 network 192.168.66.0 0.0.0.3 area 0 network 10.10.0.248 0.0.0.3 area 0 network 10.10.0.240 0.0.0.3 area 0 network 10.10.0.236 0.0.0.3 area 0 exit int s0/2/0 ip ospf hello-interval 20 ip ospf dead-interval 80 exit router ospf 10 auto-cost reference-bandwidth 1000 exit int s0/1/1 ip ospf cost 50 exit router ospf 10 passive-interface g0/0/0 exit end copy running-config startup-config RTR-B Router / (Router 5)enable configure terminal router ospf 10 network 10.10.0.240 0.0.0.3 area 0 network 10.10.0.244 0.0.0.3 area 0 network 192.168.33.0 0.0.0.15 area 0 exit router ospf 10 auto-cost reference-bandwidth 1000 exit router ospf 10 passive-interface g0/0/0 exit ntp server 192.168.33.14 exit copy running-config startup-config RTR-C Router / (Router 6)enable configure terminal router ospf 10 network 192.168.44.0 0.0.0.255 area 0 network 192.168.55.0 0.0.0.255 area 0 network 10.10.0.248 0.0.0.3 area 0 network 10.10.0.244 0.0.0.3 area 0 exit router ospf 10 auto-cost reference-bandwidth 1000 exit router ospf 10 passive-interface g0/0/0 passive-interface g0/0/1 exit access-list 101 deny tcp any host 192.168.33.14 eq www access-list 101 permit ip any any int g0/0/0 ip access-group 101 in end copy running-config startup-config RTR-B Router (Part 4, step 2) / (Router 5)Note: IOS image file (.bin file) name may be different RTR-B>enable RTR-B#show flash: System flash directory: File Length Name/status 3 486899872isr4300-universalk9.03.16.05.S.155-3.S5-ext.SPA.bin 2 28282 sigdef-category.xml 1 227537 sigdef-default.xml [487155691 bytes used, 2761893909 available, 3249049600 total] 3.17338e+06K bytes of processor board System flash (Read/Write) RTR-B#copy flash tftp Source filename []? isr4300-universalk9.03.16.05.S.155-3.S5-ext.SPA.bin Address or name of remote host []? 192.168.33.14 Destination filename [isr4300-universalk9.03.16.05.S.155-3.S5-ext.SPA.bin]?
About The Authoradmin |